What are the different types of enema equipment and how does it work? (Part II)
Posted on 25 May 2009
It is very easy and convenient to use the enema bag equipment. All you need to do is to fill the enema bag with the suggested enema solution or with water. Now you need to hang the enema bag by the hook to any handy place of your convenience. Next you need to make sure that the insertion tip is connected properly to one side of the tubing and the other side of it to the enema bag. Now you need to insert the insertion tip very carefully into the anus. It is highly recommended to apply some good quality lubricant on the insertion tip before inserting it into the anus which helps in insertion without difficulty.
Once the above steps are done you need to release the flow clamp to facilitate the enema solution to exit the enema bag through the tube and flow properly to the rectum. You can also control the enema solution flow depending on the adjustment of the height of the bag and how far the clamp is opened. Normally the flow is much faster if the enema bag is hung too high. You can stop the enema solution flow once done by closing the flow clamp.
… Continued (Part III)
No Comments »
